• Solution


Your location:Home > Solution >

How to determine whether the LVDS line order of the LCD screen is standard?


  To determine whether the LVDS line sequence of the LCD screen is standard, you can follow the following steps:

  First, check the identification and model on the LVDS cable to ensure it is the correct specification. If you are unsure of the cable specifications, please consult the manufacturer's specifications.

  Determine the signal direction between connected devices. In most cases, LVDS signals should be transmitted one-way from the transmitter to the receiver, so it is necessary to determine which device is the sender and which device is the receiver.

  Check the pin connections of the LVDS cable and ensure that each pin is correctly connected to the corresponding pin. This information can be found in the manufacturer's specifications.

  Finally, please use testing tools such as an oscilloscope to verify whether the LVDS signal is transmitting properly. Whether the LVDS line sequence is standard can be determined by comparing the waveform, amplitude, and stability of the reference signal and the received signal.

  If you are unsure how to proceed with any of the above steps, please consult a professional or contact the manufacturer for support and assistance.


  • Contact Us
  • Company Address: Room 4B206,
    Xigang New Territories, No. 206,
    Zhenhua Road, Xihu District, Hangzhou
  • TEL:0571-81061650
  • Mobile: 18868786964
  • FAX:86-0571-81061653
  • Contact:Mr. Hong
  • Email:market@hzxuhong.com