Hangzhou Xuhong Technology Co.,Ltd
EN
中文
During the manufacturing process of a frame attached touch screen, it is necessary to first glue the touch screen and the frame together, and then paste the entire touch screen/frame assembly onto the surface of the display. This scheme has advantages over other touch screen schemes (such as externally mounted, embedded, etc.) such as convenient installation and low maintenance costs. At the same time, you can also customize specific requirements such as colors, sizes, and shapes according to customer requirements.
Frame attached touch screens are widely used in various consumer electronics products, such as smartphones, tablets, laptops, and monitoring displays.
The following points should be paid attention to during the bonding process of frame mounted touch screens:
Cleaning: Before fitting, it is necessary to clean the screen border and the surface of the touch screen. Ensure that both surfaces are clean, free of grease, dust, debris, etc.
Positioning: When fitting, it is necessary to accurately position the touch screen and screen borders. You can use professional positioning tools, or use tools such as a ruler to assist in accurate positioning.
Pressure: When fitting, appropriate pressure needs to be applied to ensure that the touch screen fully fits the screen border. Too light pressure can cause an insecure fit, while excessive pressure can cause the screen to crack or damage.
Heat treatment: Some touch screens require heat treatment to properly fit. In this case, it is necessary to operate according to the instructions provided by the touch screen manufacturer.
Quality control: After the fitting is completed, it is necessary to conduct quality control on the product, check for air bubbles, loose fitting, and other issues, and promptly repair or replace them.
