Send your panel model and cable requirements. We will help review the connection.
An LVDS cable carries image data from a controller to an LCD panel. A backlight cable connects the backlight power and control circuits. Depending on the panel and controller, these connections may use separate cables or share a harness. To select a cable, start with the complete panel model and controller board revision, then compare the pin assignments at both ends.
Connectors and pinout. Match connector series, pitch, pin count, pin 1 orientation and the pin-to-pin wiring at both ends.
LVDS configuration. Check single- or dual-channel operation, bit depth and JEIDA or VESA mapping against the panel and controller documentation.
Backlight connection. Confirm the driver location, supply voltage, polarity, current requirements and any enable or dimming signals.
Mechanical fit. Measure the cable route and check exit direction, clearance and shielding requirements for the equipment.
Check the wiring diagrams first. Identical connectors can carry different signals or supply voltages on the same pins. Confirm the pin-to-pin wiring before applying power.
LVDS and eDP use different signaling. A passive cable cannot convert between them. Check whether the controller supports the panel interface directly or requires compatible conversion hardware.
Send the full LCD model and revision, the controller board model, clear photos of both connectors, the required cable length and quantity. Include the datasheet or wiring diagram if available.
Match the cable to both the LCD panel and controller board. Send both model codes, connector photos, pinouts, required length and cable-routing details.
Matching for:
Return to the selected LCD panelSelect a panel by full model code, resolution and operating requirements.
Explore original panel models and request the applicable specification.
Browse by size and complete model code, including the suffix.
Review touch dimensions, host connection, cover glass and bonding requirements.
Match the host video output to the panel interface, timing and power requirements.
Connector pin count alone does not establish compatibility. Confirm the signal mapping and supply connections against the panel and controller documentation before connection.
We will review the selected panel, controller firmware, cable pinout, power and touch configuration before confirming the proposed assembly. Send your quantity, application, delivery country and required date.
Request a matched display assembly