XH101664A-GDA-A1 10.1-Inch Capacitive Touch Panel
The XH101664A-GDA-A1 is a 10.1-inch capacitive touch panel with an ILITEK ILI2511 controller, 10-point touch and a 4-pin USB connection. The specifications below are based on the corresponding structural drawing, revision A0, dated June 23, 2018. This is a touch panel, not an LCD display module.
Mechanical Specifications
| Model | XH101664A-GDA-A1 |
|---|
| Size | 10.1 inches |
|---|
| Cover Lens Material | Tempered glass |
|---|
| Cover Lens Dimensions (W × H) | 233.08 × 137.06 mm; tolerance ±0.1 mm for each dimension |
|---|
| Cover Lens Viewing Area (W × H) | 223.52 × 126.11 mm |
|---|
| Sensor Dimensions (W × H) | 231.58 × 136.06 mm; tolerance ±0.2 mm for each dimension |
|---|
| Sensor Active Area (W × H) | 224.52 × 127.11 mm |
|---|
| Panel Stack Thickness | 1.45 ±0.15 mm |
|---|
| Cover Lens Thickness | 0.70 ±0.05 mm |
|---|
| LOCA Layer Thickness | 0.20 ±0.05 mm |
|---|
| Sensor Thickness | 0.55 ±0.05 mm |
|---|
| Component Area Total Thickness | 4.0 ±0.1 mm; check the drawing for the measurement location and installation clearance |
|---|
| Surface Hardness | 6H |
|---|
| Light Transmittance | Greater than 86% |
|---|
| Unspecified Dimensional Tolerance | ±0.2 mm, as stated in the drawing |
|---|
Controller and Interface
| Controller IC | ILITEK ILI2511 |
|---|
| Touch Points | 10 |
|---|
| Interface | 4-pin USB |
|---|
| Supply Voltage | 5 V DC |
|---|
USB Pin Assignment
| Pin | Signal |
|---|
| 1 | VDD / 5 V |
| 2 | D- |
| 3 | D+ |
| 4 | GND |
Verify connector orientation and pin numbering against the approved drawing before wiring. Do not substitute the pin assignment from a different touch-panel model.
Environmental Ratings
| Operating Temperature | -20 to +70 °C |
|---|
| Operating Humidity | ≤90% RH |
|---|
| Storage Temperature | -30 to +80 °C |
|---|
| Storage Humidity | ≤90% RH |
|---|
Selection and Drawing Confirmation
Confirm the latest drawing revision, cover lens dimensions, viewing area, component clearance, connector orientation and controller compatibility before integration. The drawing states RoHS compliance; request current supporting documentation if required. Current availability and production status should be confirmed separately.
Contact us for the current drawing, availability and a quotation for XH101664A-GDA-A1. Include your application and required quantity in your inquiry.
