eDP Industrial LCD Panels
Embedded DisplayPort panels support high-resolution industrial HMI and embedded systems, but the eDP interface name alone does not confirm compatibility. Compare the complete model suffix, connector, lane configuration, voltage, timing, backlight and mechanical requirements before selecting or replacing a panel.
Where eDP Industrial Displays Fit
The verified AUO model group on this page covers 10.1, 13.3, 15 and 15.6-inch eDP panels for industrial HMI, embedded terminals, automation equipment, diagnostic systems and outdoor display projects.
Choose the diagonal size and resolution from the user-interface and enclosure requirements first, then confirm the controller output, cable, power sequence and environmental specification.
Connector, Lane and Link Checks
Confirm the connector series, pin count, pitch and complete pin assignment. Verify lane count, link rate, signal mapping, panel voltage, auxiliary channel, hot-plug behavior and power-up sequence against the host controller.
The backlight circuit must also be checked separately for input voltage, current, enable, dimming and cable requirements. Do not connect a replacement panel from connector appearance alone.
Mechanical and Environmental Compatibility
Compare outline dimensions, active area, mounting points, connector location, cable routing, bezel opening and touch-panel stack-up. Small mechanical differences can prevent an electrically compatible panel from fitting the equipment.
Brightness, viewing angle, operating temperature, vibration exposure, EMC behavior and lifecycle status should be qualified in the final system.
eDP Replacement Information to Send
Provide the complete current model suffix, datasheet, front and rear label photos, controller information, cable details, quantity, application and delivery country.
A replacement recommendation is an engineering shortlist. Samples and the complete system must be validated before production approval.
Key Selection Checks
- Exact model suffix, size and resolution
- Connector, pin assignment, lane count and link rate
- Panel voltage, backlight and power sequence
- Dimensions, temperature, brightness and lifecycle
Verified Models to Review
| Model | Size | Evaluation Role |
|---|---|---|
| AUO G101EAN02.4 | 10.1 inch | Industrial eDP panel evaluation |
| AUO G101UAN01.0 | 10.1 inch | High-resolution eDP panel evaluation |
| AUO G101UAN01.1 | 10.1 inch | High-resolution eDP HMI evaluation |
| AUO G133HAN02.0 | 13.3 inch | Full-HD eDP panel evaluation |
| AUO G133HAN02.2 | 13.3 inch | Full-HD industrial eDP evaluation |
| AUO G133HAN03.0 | 13.3 inch | Industrial eDP display evaluation |
| AUO G133HAN03.1 | 13.3 inch | Industrial eDP replacement evaluation |
| AUO G150XTN03.4 | 15 inch | XGA eDP panel evaluation |
| AUO G150XTN03.8 | 15 inch | Industrial eDP HMI evaluation |
| AUO G150XTN06.C | 15 inch | High-brightness eDP panel evaluation |
| AUO G150XAN03.0 | 15 inch | Industrial eDP touch integration evaluation |
| AUO G156XTN01.2 | 15.6 inch | Wide-temperature eDP panel evaluation |
| AUO G156XTN02.3 | 15.6 inch | HD eDP panel evaluation |
| AUO G156XTN02.0 | 15.6 inch | Industrial eDP module evaluation |
Model suitability must be confirmed against the complete datasheet and final equipment requirements.
Related Products and Technical Resources
- AUO industrial LCD panels
- 10.1-inch industrial LCD panels
- 12.1-inch industrial LCD displays
- eDP display selection for industrial HMI
- G101EAN02.4 10.1-inch eDP LCD
- G101UAN01.0 10.1-inch eDP LCD
- G101UAN01.1 10.1-inch eDP LCD
- G133HAN02.0 13.3-inch eDP LCD
- G133HAN02.2 13.3-inch eDP LCD
- G133HAN03.0 13.3-inch eDP LCD
- G133HAN03.1 13.3-inch eDP LCD
- G150XTN03.4 15-inch eDP LCD
- G150XTN03.8 15-inch eDP LCD
- G150XTN06.C 15-inch eDP LCD
- G150XAN03.0 15-inch eDP LCD
- G156XTN01.2 15.6-inch eDP LCD
- G156XTN02.3 15.6-inch eDP LCD
- G156XTN02.0 15.6-inch eDP LCD
Frequently Asked Questions
Does the same eDP connector mean two LCD panels are interchangeable?
No. Verify the connector, complete pin map, lane count, link rate, voltage, timing, backlight, power sequence and mechanical specifications.
Which AUO eDP panel sizes are listed here?
The verified group includes 10.1, 13.3, 15 and 15.6-inch AUO eDP industrial LCD models.
Can an LVDS panel be replaced directly with an eDP panel?
Not directly. LVDS and eDP use different signaling and controller requirements, so the host, cable, power and software design must support the selected interface.
What information is needed for an eDP compatibility review?
Send the complete model suffix, both datasheets, controller and cable information, panel photos, quantity and application requirements.
Request eDP Panel Compatibility Review
Send the exact model, controller, cable, quantity, application and delivery country for an eDP panel shortlist.