AUO G104SAN01.1 10.4-inch SVGA AHVA LVDS LCD Panel
G104SAN01.1 is a 10.4-inch AUO Display Plus TFT-LCD module with 800 × 600 SVGA resolution, AHVA normally-black display mode and 500 cd/m² typical center luminance. It uses 1-channel LVDS input and includes an LED backlight driving board.
Preliminary specification: The values below refer to ver.0.1, approved March 20, 2026. Confirm the applicable controlled revision, current production position and supply before ordering or approving a design. Weight remains TBD in this document.
Request G104SAN01.1 datasheet and quote | Review legacy G104STN01.3
G104SAN01.1 Key Specifications
| Manufacturer / model | AUO Display Plus / G104SAN01.1 |
|---|
| Specification status | Preliminary Specifications ver.0.1; approved 2026-03-20 |
|---|
| Diagonal / resolution | 10.4 inches / 800 × 600 SVGA, 4:3 |
|---|
| Display mode / colors | AHVA, normally black / 16.7M or 262K |
|---|
| Center luminance | 500 cd/m² typical; 400 cd/m² minimum at 42 mA per LED line and 25°C |
|---|
| Contrast ratio | 1200:1 typical; 800:1 minimum |
|---|
| Viewing angle | 89° / 89° / 89° / 89° typical (R/L/U/D, CR = 10); 80° minimum in each direction |
|---|
| Signal interface | 1-channel LVDS; verify pin assignment and 6/8-bit configuration |
|---|
| LCD logic supply | 3.3 V typical; specified range 3.0–3.6 V |
|---|
| Backlight | LED system with included driving board; separate backlight input |
|---|
| Backlight input | 12 V typical, range 10.8–13.2 V; 2.63 W typical at 100% PWM duty |
|---|
| Typical module power | 3.16 W, all-white pattern under specified conditions |
|---|
| Active area / pixel pitch | 211.2 × 158.4 mm / 0.264 × 0.264 mm |
|---|
| Module outline | 227.3 × 177.5 × 9.3 mm typical; confirm mechanical drawing |
|---|
| Weight | TBD in the reviewed preliminary specification |
|---|
| Surface treatment | Anti-glare, 3H hardness |
|---|
| Operating / storage range | −30 to +80°C in the reviewed preliminary specification; observe all environmental limits |
|---|
| Backlight life | 70,000 hours minimum estimated to 50% initial brightness at 42 mA and 25°C; high current, temperature and humidity reduce life |
|---|
| Response time | Confirm against the applicable controlled specification: preliminary rise/fall and total entries are inconsistent |
|---|
Replacement Review for G104STN01.3
The supplied G104STN01.3 EOL notice recommends G104SAN01.1 as the replacement model and describes a transition from TN to AHVA. The recommendation identifies a candidate for engineering review; it does not prove direct compatibility.
The reviewed legacy specification lists TN normally white, 450 cd/m² typical brightness and 700:1 typical contrast. This preliminary G104SAN01.1 specification lists AHVA normally black, 500 cd/m² and 1200:1 typical contrast. Evaluate viewing behavior and image appearance in the equipment.
Both reviewed documents list 800 × 600 resolution and a 227.3 × 177.5 × 9.3 mm typical outline, but these matching summary values do not establish mounting, connector or electrical interchangeability. Compare the complete drawings, LVDS pin assignment and mapping, timing, panel and backlight supplies, dimming and power sequence, then validate a sample.
Design and Supply Confirmation
Check the exact .1 suffix: G104SAN01.0 and G104SAN01.2 are separate model records, and their parameters must not be substituted here. Brightness alone does not guarantee sunlight readability; evaluate cover glass, reflections, enclosure and thermal design together.
Stock, product condition, document revision, quantity, price and lead time are confirmed for each enquiry. Controller boards, cables and touch panels require separate compatibility and supply confirmation. A complete HDMI or VGA kit is not implied by the included LED driving board.
Frequently Asked Questions
What resolution and interface does G104SAN01.1 use?
The reviewed preliminary specification lists 800 × 600 SVGA and 1-channel LVDS input. Confirm the full interface details for the unit being supplied.
Can it directly replace G104STN01.3?
It is the manufacturer-recommended replacement model in the supplied EOL notice. Compare the controlled specifications and test a sample before approving a replacement.
Is this a final specification?
No. This page is based on Preliminary Specifications ver.0.1, approved 2026-03-20. Request the current applicable datasheet and mechanical drawing before design-in.
What should I send for a quotation?
Include G104SAN01.1, quantity, destination country and application. For replacements, include the installed model, controller and cable details and mounting requirements. Label photos and drawings can be exchanged separately after the enquiry.
Request G104SAN01.1 Review and Quote
Specification basis: supplied AUO Display Plus G104SAN01.1 Preliminary Specifications ver.0.1, approved 2026-03-20, sections 2.1–2.2 and 5.1–5.2 (PDF pages 5–6, 11 and 13). Replacement relationship: supplied G104STN01.3 EOL notice, page 2. Preliminary values do not establish current availability or the latest controlled revision.
