Need an LCD panel or selection support? Send your model number and project requirements.
AUO G215HAN01.7 is a 21.5-inch FHD AHVA LCD module with 350 cd/m² typical brightness, a dual-channel LVDS interface and a 0 to +50 °C operating range. Its typical module dimensions are 484.46 × 284.49 × 11.1 mm, with a 476.064 × 267.786 mm active area.
For industrial HMI or embedded display projects, match the enclosure, host interface and backlight driver to the exact panel. We can help with driver boards, touch panels, frame bonding and full optical bonding for your assembly.
Request G215HAN01.7 datasheet & quoteThis summary uses AUO final specification version 1.0, dated 13 December 2023. Its cover identifies the module as G215HAN01.7(00), corresponding to the G215HAN01.700 designation. Include the complete label code when requesting a panel or replacement.
| Parameter | Specification |
|---|---|
| Manufacturer / model | AUO / G215HAN01.7; specification cover designation: G215HAN01.7(00) |
| Screen size / resolution | 21.5 inches / 1920 × 1080 pixels (FHD), 16:9 |
| Panel technology | AHVA (IPS-like), normally black |
| Central luminance | 350 cd/m² typical; 280 cd/m² minimum |
| Contrast ratio | 1000:1 typical; 600:1 minimum |
| Viewing angles | 89° right / 89° left / 89° up / 89° down, typical at CR > 10 |
| Response time | 22 ms typical (Tr + Tf) |
| Display colors | 16.7 million (RGB 6-bit + Hi-FRC) |
| Color gamut | sRGB: 99% typical; 95% minimum |
| Luminance uniformity | 80% typical; 75% minimum, nine-point minimum/maximum luminance ratio |
| Active area (H × V) | 476.064 × 267.786 mm |
| Module dimensions (H × V × D) | 484.46 × 284.49 × 11.1 mm typical; use the mechanical drawing for tolerances and local projections |
| Weight | 1760 g typical |
| Surface treatment | Anti-glare, 3H hard coating |
| Display interface | Dual-channel LVDS; 8-bit VESA signal input |
| Signal connector | JAE FI-XB30SSRLA-HF16-R3500, 30 pins |
| LCD logic supply (VDD) | 5.0 V typical; specified operating range 4.5–5.5 V |
| Frame rate | 60 Hz typical |
| Typical power consumption | 11.83 W total: 1.80 W LCD logic + 10.03 W backlight, under the stated test conditions |
| LED backlight driver | Not included; external driver required |
| LED lifetime | 30,000 hours minimum at IF = 55 mA and ambient temperature Ta = 25 °C, to 50% of initial brightness |
| Operating temperature | 0 to +50 °C; the +50 °C limit is defined as panel surface temperature |
| Storage temperature | −20 to +60 °C |
Optical values apply under the specification's measurement conditions. The power summary uses the LCD white pattern at 60 Hz and backlight current of 55 mA. Higher LED current, temperature or humidity can reduce backlight life; the lifetime rating is not a warranty period.
The 21.5-inch diagonal describes the display size, not its outside dimensions. Use the 484.46 × 284.49 mm module dimensions to start your layout, then check mounting points, local projections and cable clearance against the mechanical drawing. The 11.1 mm typical thickness is not a maximum clearance allowance for every part of the assembly.
The +50 °C operating limit is defined at the panel surface. Account for heat inside the enclosure and test the finished equipment in its intended operating conditions.
The module accepts dual-channel LVDS with 8-bit VESA input mapping through a 30-pin JAE connector. The 16.7-million-color display uses 6-bit + Hi-FRC; this describes color generation and is separate from the 8-bit input signal format.
For an HDMI host, request a compatible LCD controller and cable. Check the signal mapping, timing, connector orientation and power sequence for the full model code. A matching connector alone does not establish compatibility.
The module does not include an LED backlight driver. Its 5 V VDD is the LCD logic supply, so the backlight requires a separately matched drive circuit. Send your available power supply and host video output when requesting an assembly.
We support matching touch panels and driver boards, with frame bonding or full optical bonding assessed for your selected assembly. Provide the cover-glass and enclosure drawings, touch interface, operating system, viewing area and operating conditions so we can evaluate the configuration.
View capacitive touch panel selection and bonding options
When replacing an installed display, send the panel label, connector photos and equipment details. Confirm the complete suffix and applicable drawing before ordering. Other 21.5-inch FHD modules may have different dimensions, brightness, temperature limits or electrical requirements.
Compare AUO 21.5-inch LCD panel options if your project needs a different brightness or operating range.
Include the full model code, quantity, application, delivery country and required date. For a complete display assembly, also specify the host interface, power supply, touch requirements and bonding method.
We will confirm the applicable specification, availability, price and lead time for your enquiry. If the standard panel does not meet your requirements, we can discuss customization options.
Enquire about G215HAN01.7 Explore ODM display optionsContact us to request the current datasheet and mechanical drawing for G215HAN01.7. Please include your application and required quantity so we can confirm the applicable revision.
Request G215HAN01.7 DatasheetBuild a display assembly around your selected LCD panel. Explore touch panels, LCD controller boards and signal or backlight cables.
Matching for:
Return to the selected LCD panelReview touch dimensions, host connection, cover glass and bonding requirements.
Match the host video output to the panel interface, timing and power requirements.
Confirm both connector ends, pin mapping, cable length and backlight connections.
We will review the selected panel, controller firmware, cable pinout, power and touch configuration before confirming the proposed assembly. Send your quantity, application, delivery country and required date.
Request a matched display assembly