Need an LCD panel or selection support? Send your model number and project requirements.
G065VN01 V2 is a 6.5-inch industrial TFT-LCD module with 640 x 480 VGA resolution, 800 cd/m² typical brightness, AHVA normally-black display mode and a 1-channel LVDS interface. The specified panel-surface operating and storage temperature range is -30 to +80 °C.
The reviewed document is AUO Display+ Final Specification Ver. 1.0, approved December 12, 2022. The module is identified as G065VN01 V2 (97D06G01.221); this website uses G065VN01 V221 to distinguish this version.
Request 97D06G01.221 Datasheet and Quote | View the legacy V2 page
AUO Display+ issued an engineering-change notice because the driver ICs used by the legacy 97.06G01.211 part were moving to end of life. The replacement implementation uses part number 97D06G01.221 and was scheduled for phase-in from May 2023.
| Item | Legacy .211 implementation | Current .221 implementation | Review requirement |
|---|---|---|---|
| Gate IC | Novatek NT39207 | Sitronix ST5043DA | Use the correct controlled specification |
| Source IC | Novatek NT39606H-D/3 | Sitronix ST5891DA | Recheck electrical and timing data |
| LED driver IC | Richtek RT8560GQW | Richtek RT4527AGQW | Recheck backlight power and dimming |
| Display mode | TN, normally white | AHVA, normally black | Revalidate optical performance |
| Typical total power | 3.86 W | 2.27 W | Verify power design and sequence |
| Backlight life | 50,000 hours estimated | 70,000 hours estimated; see the specified conditions | Apply the conditions in the applicable specification |
| Manufacturer / Model | AUO Display+ / G065VN01 V2 |
|---|---|
| Part number | 97D06G01.221 |
| Display size | 6.5 inch, 4:3 |
| Resolution | 640 x 480 (VGA) |
| Display mode | AHVA, normally black |
| Colors | 16.7M / 262K (8-bit / 6-bit) |
| Brightness | 800 cd/m² typical; 600 cd/m² minimum |
| Contrast ratio | 1000:1 typical; 700:1 minimum |
| Viewing angle | Right/Left/Up/Down 89 degrees typical, 80 degrees minimum (CR 10) |
| Response time | 15 ms rising + 10 ms falling; 25 ms total typical |
| Active area | 132.48 x 99.36 mm |
| Pixel pitch | 0.207 x 0.207 mm |
| Outline dimensions | 153.0 x 118.0 x 10.9 mm typical |
| Weight | 170 g typical |
| Signal interface | 1-channel LVDS, 6/8-bit selectable |
| Panel logic supply | 3.3 V typical |
| LVDS connector | STM MSB24013P20 or compatible, 20 pins |
| Mating connector | Hirose DF19-20S-1C or compatible |
| Backlight input | 12 V typical; 2.0 W typical |
| Backlight life | 70,000 hours listed in the minimum column; the footnote describes operating life as estimated data, to 50% initial brightness at 49 mA and 25°C. High temperature and humidity reduce life. |
| Typical module power | 2.27 W |
| Surface treatment | Anti-glare, 3H hardness |
| Operating / storage range | -30 to +80 °C, specified as panel-surface temperature |
The 800 cd/m² typical center luminance supports evaluation for high-ambient-light industrial applications. It does not by itself guarantee sunlight readability. Cover glass, optical bonding, surface reflections, enclosure design, dimming settings and ambient illumination all affect system-level visibility.
Do not approve another G065VN01 suffix as a direct replacement based only on diagonal size and resolution. Compare the complete specifications, connector position, pin assignment, timing, voltage, backlight, outline and mounting details, then validate a sample in the final equipment.
Production status, stock, MOQ and lead time can change and are not established by this specification. Request written availability confirmation for the exact revision. Provide the full model and part number, required quantity, destination country, application and required delivery date. Label photos and drawings can be exchanged separately with our team at market@hzxuhong.com.
Request 97D06G01.221 Datasheet and Quote | View the legacy V2 page
Compare the discontinued G065VN01 V2 part 97.06G01.211 with the current G065VN01 V221 part 97D06G01.221, including IC changes, optical performance, power and replacement checks.
View G065VN01 V2 vs V221 Selection GuideSpecification basis: AUO Display+ G065VN01 V2 (97D06G01.221), Final Specification Ver.1.0, approved 2022-12-12, sections 2.1–2.2, 4.2 and 5.1–5.2 (PDF pages 6–7, 10–13). Version transition is described in the supplied G065VN01 V2 EC notice, pages 2–3; its May 2023 phase-in date was a planned schedule, not confirmation of current production or supply. Sample validation remains required.
Contact us to request the current datasheet and mechanical drawing for G065VN01 V2 (97D06G01.221). Please include your application and required quantity so we can confirm the applicable revision.
Request G065VN01 V2 (97D06G01.221) DatasheetBuild a display assembly around your selected LCD panel. Explore touch panels, LCD controller boards and signal or backlight cables.
Matching for:
Return to the selected LCD panelReview touch dimensions, host connection, cover glass and bonding requirements.
Match the host video output to the panel interface, timing and power requirements.
Confirm both connector ends, pin mapping, cable length and backlight connections.
We will review the selected panel, controller firmware, cable pinout, power and touch configuration before confirming the proposed assembly. Send your quantity, application, delivery country and required date.
Request a matched display assembly