AUO A070VTN06.4 7-inch 500-nit Wide-Temperature TFT-LCD

  • AUO A070VTN06.4 7-inch 500-nit Wide-Temperature TFT-LCD
  • AUO A070VTN06.4 7-inch 500-nit Wide-Temperature TFT-LCD
  • Model:A070VTN06.4
  • Brand:AUO
  • Size:7.0"
  • Resolution:800×480
  • Brightness:500 cd/m²
  • Perspective:75/75/55/65 (Typ.)
  • Interface:RGB (1 ch, 6/8-bit) 
  • Operating Temp.:-30 ~ 80 °C
  • Production State:Availability by Inquiry
  • Request a Quote
  • Technical Parameters
  • AUO A070VTN06.4 7-inch Wide-Temperature TFT-LCD

    AUO A070VTN06.4 is a 7.0-inch transmissive TFT-LCD module with 800 x 480 WVGA resolution, 500 cd/m2 typical center luminance and an 18/24-bit parallel RGB interface. Its specified operating and storage temperature ranges are both -30 to +80 degrees C.

    The module combines the TFT-LCD, power circuitry and a white-LED backlight. It is suited to embedded display projects that can provide the required RGB timing, multiple panel power rails and the specified power sequence.

    Exact model identification: Use the complete model A070VTN06.4 in purchasing and engineering records. Do not confuse it with A070VTN06.1 or other A070VTN06 revisions; connector assignment, brightness, power rails, timing, outline and temperature ratings may differ.
    Availability notice: The reviewed source is a final specification dated December 4, 2019. It does not establish the model's current production status. Confirm present availability, date code and the latest AUO-controlled specification before placing an order.

    Reviewed Product Specifications

    Manufacturer / ModelAUO / A070VTN06.4Module type7-inch color TFT-LCD module
    Resolution800 RGB x 480 (WVGA)Pixel arrangementRGB stripe
    Active area154.08 x 85.92 mmPixel pitch0.1926 x 0.179 mm
    Display modeNormally white, transmissiveSurface treatmentAnti-glare, 3H
    Brightness500 cd/m2 typical; 400 cd/m2 minimumUniformity75% typical; 70% minimum, 9 points
    Contrast ratio500:1 typical; 400:1 minimumResponse time25 ms typical; 50 ms maximum, rise plus fall
    Viewing angleRight/Left 75 degrees, Up 55 degrees, Down 65 degrees typical (CR 10)Color gamut50% NTSC typical
    Display colors16.2M colorsSignal interface18/24-bit parallel RGB; DE or SYNC mode
    Signal connectorHirose FH12A-50S-0.5SH, 50 pinsNominal logic supplyDVDD 3.3 V typical
    Module outline164.9 x 100.0 x 5.7 mm typicalWeight150 g typical, +/-10 g
    Backlight9 WLEDs, 3 strings x 3 LEDsLED life50,000 hours minimum under specified conditions
    Operating temperature-30 to +80 degrees CStorage temperature-30 to +80 degrees C
    RoHSCompliant according to the reviewed specification

    Parallel RGB Interface and Power Requirements

    A070VTN06.4 uses a 50-pin 0.5-mm-pitch interface with RGB data, DCLK, DE, HSYNC, VSYNC, scan-direction controls and dedicated panel power rails. It is a parallel RGB panel, not an LVDS panel.

    • For 24-bit input, use all eight bits for each red, green and blue channel.
    • For 18-bit input, the specification requires the two lower bits of each color channel to be grounded.
    • Typical pixel clock is 29.2 MHz; the specified frame-rate range is 60 to 70 Hz.
    • Data is latched on the falling edge of DCLK.
    • DVDD, AVDD, VGH and VGL are separate rails and must follow the controlled power sequence.
    Power-sequence warning: The specification states that an incorrect power-on or power-off sequence can permanently damage the module. Validate the controller board's rail timing, RESET behavior and signal state before connecting a panel.

    Backlight and Mechanical Integration

    The backlight contains nine LEDs arranged as three strings of three. The documented guideline is 54 mA per channel, 9.3 to 10.2 V LED supply voltage and approximately 1.66 W total LED power. The LED driver must be designed with voltage capacity above the specified maximum.

    The 50,000-hour minimum backlight-life figure is defined at the specified LED current and 25 +/-2 degrees C until brightness reaches 50% of its original value. Higher current, temperature or humidity can reduce operating life.

    Use the controlled outline drawing for the 164.9 x 100.0 x 5.7 mm module. Check active area, bezel opening, FPC position, connector clearance and mounting pressure in the final enclosure; the display must not be twisted or bent.

    Engineering Validation Checklist

    1. Confirm the rear-label model is exactly A070VTN06.4.
    2. Verify the 50-pin connector orientation and complete pin assignment.
    3. Check 18/24-bit RGB mapping, DE/SYNC selection, DCLK edge and 800 x 480 timing.
    4. Validate DVDD, AVDD, VGH, VGL, RESET and backlight power sequencing.
    5. Confirm the 3-string LED driver current, voltage headroom and thermal behavior.
    6. Test brightness, viewing direction, low/high temperature and EMI in the completed equipment.
    Does A070VTN06.4 use LVDS?    No. The reviewed specification defines a parallel RGB interface with a 50-pin connector. A host designed only for LVDS requires a suitable conversion design and full timing verification.
    Can A070VTN06.1 directly replace A070VTN06.4?    Do not assume so. The complete connector pinout, power rails, timing, brightness, outline, mounting points and backlight requirements must be compared before replacement approval.
    Is the operating temperature -20 to +70 degrees C?    No. The reviewed A070VTN06.4 specification states -30 to +80 degrees C for both operating and non-operating storage temperature ranges.
    Is A070VTN06.4 currently in mass production?    The 2019 final specification does not confirm current production status. Availability, date code and lifecycle status should be verified before ordering.
    Procurement or replacement review: Provide a clear rear-label photo, required quantity, controller-board interface and environmental requirements. Compatibility should be approved from the latest controlled drawing and verified in the final equipment.

Datasheet and Drawing Request

Contact us to request the current datasheet and mechanical drawing for A070VTN06.4. Please include your application and required quantity so we can confirm the applicable revision.

Request A070VTN06.4 Datasheet

Complete your display assembly

Build a display assembly around your selected LCD panel. Explore touch panels, LCD controller boards and signal or backlight cables.

Touch panels and bonding

Review touch dimensions, host connection, cover glass and bonding requirements.

LCD controller boards

Match the host video output to the panel interface, timing and power requirements.

Signal and backlight cables

Confirm both connector ends, pin mapping, cable length and backlight connections.

We will review the selected panel, controller firmware, cable pinout, power and touch configuration before confirming the proposed assembly. Send your quantity, application, delivery country and required date.

Request a matched display assembly

Get In Touch

Request a Model-Specific Quote

Fields marked * are required. Confirm the model below and add your quantity, application and delivery country. Availability and lead time are confirmed for each enquiry.

  • Contact Us
  • Email: market@hzxuhong.com
  • Skype: hzxuhong
  • Whatsapp: +86-18157128672 
  • Tel:+86-18157128672
  • Address:A402, No. 8 Xiyuan 9th Road, Xihu District, Hangzhou, Zhejiang, China