AUO B070ATN01.0 7-inch 1024 × 600 LVDS LCD specifications
AUO B070ATN01.0 is a 7.0-inch color TFT-LCD module with 1024 × 600 pixels, a normally-white display mode and a single-channel LVDS input. The reviewed AUO final specification, document version 1.0 dated January 19, 2015, states 350 cd/m² typical five-point-average luminance, 700:1 typical contrast and operation from −20 to +60 °C. It describes a 39-pin module interface and an LED backlight without an integrated driver.
Display and mechanical data
| Parameter | B070ATN01.0 specification | PDF page |
|---|---|---|
| Display / resolution | 7.0-inch TFT-LCD; 1024 × 600 pixels; normally white | 5 |
| Active area / pixel pitch | 153.6 × 90.0 mm; 0.150 × 0.150 mm | 5 |
| Module outline | 167.25 × 104.65 mm nominal, including brackets; confirm depth and mounting from the drawing | 5, 24–25 |
| White luminance | 350 cd/m² typical; 300 cd/m² minimum, five-point average at the specified LED current | 5–6 |
| Contrast / response | 700:1 typical contrast; 16 ms typical rise plus fall | 5–6 |
| Viewing angle, R/L/U/D | 75° / 75° / 70° / 75° typical at contrast ratio 10 | 6 |
| Surface / weight | Glare finish, 3H hard coating; 100 g maximum | 5 |
| Operating / storage | −20 to +60 °C operating; −30 to +70 °C non-operating storage | 6, 12 |
LVDS and backlight integration
The module uses one LVDS channel and a 39-pin FPC interface. Its panel supply is 3.3 V typical, with a specified 3.0–3.6 V range. The pin assignment includes LVDS data and clock pairs, panel power and ground, control pins, and LED connections. Confirm connector orientation, the complete pin map, timing and power sequence against the delivered module before designing a cable or controller.
The backlight requires an external LED driver. The reviewed specification gives 12.4 V typical light-bar voltage, 13.2 V maximum, 120 mA typical total input current and 15,000 hours minimum LED half-brightness life under its stated test conditions. These figures do not establish the lifetime of an installed product at every ambient temperature or drive current.
Availability and replacement review
B070ATN01.0 appears in an older company production-stop plan with an approximate 2019 date. This historical notice does not establish current stock. For an installed machine, provide the complete rear-label model and hardware marking, photos of both sides, required quantity and host-board details. Evaluate any substitute by interface mapping, outline, mounting, backlight drive, temperature range and a sample test; a matching 7-inch diagonal and 1024 × 600 resolution are insufficient.
Frequently asked questions
Is B070ATN01.0 the same as B070ATN01.2?
No direct interchangeability is established by this B070ATN01.0 specification. The suffix identifies a different model revision. Compare the controlled B070ATN01.2 document, rear label, connector, timing and backlight before substitution.
Does this LCD accept parallel RGB?
No. The reviewed B070ATN01.0 document specifies a single-channel LVDS input through the 39-pin interface.
Is the backlight driver integrated?
No. The module has an LED backlight without an integrated backlight driving circuit; the equipment must provide a suitable external driver.
Can I still order B070ATN01.0?
Please request a current stock and lifecycle check. The 2015 technical specification and 2019 production-stop plan cannot confirm present availability.
Request a technical review: Send the full model label, quantity and application details through the B070ATN01.0 inquiry form. We can check current stock and discuss replacement candidates without assuming they are drop-in compatible.
