AUO G070VAN01.3 7-inch 520-nit AHVA Industrial LCD
AUO G070VAN01.3 is a 7-inch industrial TFT-LCD module with 800 x 480 WVGA resolution, AHVA normally-black display mode, 520 cd/m2 typical brightness and wide viewing angles. It uses a 30-pin, 1-channel LVDS interface and supports 6/8-bit data.
The model is positioned as a new 7-inch high-brightness industrial display. Production status, sample availability and mass-production timing must be confirmed in writing for the exact revision before project scheduling.
Model control: Use the complete model G070VAN01.3 in purchasing and engineering records. It is a non-touch LCD module. Do not confuse it with the G070VAT01.0 touch assembly or other G070VAN revisions, because brightness, connector, interface, outline and lifecycle status can differ.
Reviewed Product Specifications
| Manufacturer / Model | AUO / G070VAN01.3 | Module type | Industrial TFT-LCD module, no touch |
|---|
| Display size | 7.0 inch | Aspect ratio | 15:9 |
|---|
| Resolution | 800 x 480 (WVGA) | Display mode | AHVA, normally black, transmissive |
|---|
| Brightness | 520 cd/m2 typical | Contrast ratio | 1300:1 typical |
|---|
| Viewing angle | Right/Left/Up/Down 89 degrees typical (CR 10) | Response time | 11 ms rise / 19 ms fall maximum |
|---|
| Display colors | 16.7 million, 6-bit + Hi-FRC | Color gamut | 70% NTSC typical |
|---|
| Active area | 152.4 x 91.44 mm | Pixel pitch | 0.1905 x 0.1905 mm |
|---|
| Outline dimensions | Approximately 165 x 104 mm; confirm depth and tolerances from the latest drawing | Orientation | Landscape |
|---|
| Signal interface | 1-channel LVDS, 6/8-bit | Panel logic supply | 3.3 V typical |
|---|
| Signal connector | STARCONN 093G30-00001A-M4 | Connector format | 30 pins, 1.0 mm pitch |
|---|
| Backlight | WLED edge light, driver not included | Backlight life | 20,000 hours minimum under specified conditions |
|---|
| Surface | Anti-glare / matte | Frame rate | 60 Hz |
|---|
| Operating temperature | -20 to +70 degrees C | Storage temperature | -30 to +80 degrees C |
|---|
| Compliance | RoHS compliant |
|---|
New-model notice: G070VAN01.3 appears in AUO Display+ new-model planning for 2026. Availability, final specification revision, sample schedule, MOQ and lead time may still change. Do not freeze a design or production schedule without written confirmation for the exact supplied revision.
Brightness and Viewing Performance
The 520 cd/m2 typical luminance is higher than many standard indoor 7-inch modules and supports evaluation for bright indoor HMI and control-panel applications. The AHVA normally-black mode provides wide viewing angles and stable image appearance across operator positions.
High brightness does not automatically mean sunlight readability. Cover glass, optical bonding, anti-reflection treatment, enclosure shading and ambient light all influence the final result. Validate readability in the completed equipment.
LVDS and Backlight Integration
The module uses a 30-pin STARCONN connector and a 1-channel LVDS interface with 6/8-bit support. The panel logic supply is 3.3 V typical. The WLED backlight is listed without an integrated LED driver, so the host design must provide a compatible backlight-driving and dimming solution.
- Confirm the exact connector, mating cable and complete pin assignment.
- Verify LVDS mapping, bit-depth selection, polarity and 800 x 480 timing.
- Provide the required 3.3 V panel-logic supply and a compatible external LED driver.
- Apply the documented panel and backlight power sequence.
- Test dimming, flicker, startup and protection behavior in the final assembly.
Mechanical and Thermal Review
The active area is 152.4 x 91.44 mm. Public product data indicates an approximately 165 x 104 mm module outline, but the final depth, mounting details, connector position and all tolerances must be taken from the latest controlled drawing.
The listed operating range is -20 to +70 degrees C and the storage range is -30 to +80 degrees C. Verify cold start, hot operation, backlight performance, thermal management and optical behavior in the finished enclosure. Temperature limits alone do not certify the end equipment for a specific industry.
Design-in and Replacement Checklist
- Confirm G070VAN01.3 and the applicable specification revision on the rear label.
- Check active area, complete outline, mounting points and connector position.
- Confirm 30-pin LVDS mapping, voltage, timing and external LED-driver requirements.
- Do not substitute another G070VAN revision based only on size and resolution.
- Validate brightness, color, thermal behavior, EMI and vibration in the final equipment.
Replacement warning: G070VAN01.3 is not automatically interchangeable with G070VAN01.0, G070VAN01.1, G070VAT01.0 or another 7-inch WVGA panel. Compare the complete connector, pin assignment, LVDS mapping, backlight driver, outline, mounting, brightness and temperature requirements before sample testing.
Availability and Document Request
Current production status, stock, sample availability, MOQ and lead time require written confirmation. For quotation or compatibility review, provide the exact model, label photos, quantity, destination country, application and requested delivery date.
Browse more AUO industrial LCD panels or view the 7-inch AUO LCD category.
Frequently Asked Questions
Does G070VAN01.3 include a touch panel?
No. The reviewed product data describes a non-touch LCD module. A separate touch solution must be selected and mechanically validated if touch input is required.
Is the brightness 520 nits?
The available product data lists 520 cd/m2 typical brightness. Confirm minimum luminance and measurement conditions in the latest controlled specification.
Does the module include an LED backlight driver?
No. The available data lists a WLED backlight without an integrated LED driver. The host system must provide a compatible driver and dimming method.
Is G070VAN01.3 already in mass production?
It is a new model planned for 2026. Obtain written confirmation of the actual production stage, specification revision and delivery schedule before committing the project.
What information is needed for a quotation?
Send the complete model, rear-label photos, quantity, destination, application, delivery requirement and any touch, cable or controller needs.
Request the G070VAN01.3 specification, sample schedule or quotation:
Email
market@hzxuhong.com with your project details.
