BOE BA104S01-200 10.4-inch SVGA LCD specifications
BA104S01-200 is a 10.4-inch BOE TFT-LCD module with 800 × 600 pixels, a 20-pin LVDS LCD connection and a separate 2-pin LED backlight connection. The supplied BOE Product Specification Rev. 0 / P0, issued 21 January 2022, lists 350 cd/m² typical center luminance. Confirm the exact label, revision and mechanical drawing of the module offered before design approval.
Key specifications
| Parameter | BA104S01-200 specification | PDF page |
|---|
| Diagonal / pixels | 10.4 inches; 800 × 600 (SVGA), RGB stripe | 4–5 |
|---|
| Active area / outline | 211.2 × 158.4 mm / 236 × 176.9 × 5.6 mm nominal | 5 |
|---|
| Center luminance | 350 cd/m² typical; 300 cd/m² minimum under the specified test conditions | 5, 17–18 |
|---|
| Viewing angle, L/R/U/D | 80°/80°/65°/75° typical, CR ≥ 10 | 17 |
|---|
| Contrast / response | 800:1 typical / 30 ms typical | 5, 17 |
|---|
| LCD / backlight connections | 20-pin LVDS connector with 6/8-bit select on pin 4 / separate 2-pin LED connection | 9–10 |
|---|
| LCD supply | 3.3 V typical | 7 |
|---|
| Operating / storage temperature | −20 to +70 °C / −30 to +80 °C | 6 |
|---|
Selection notes
BA104S01-200 shares its nominal diagonal, pixel count and outline with BA104S01-100 and BA104S01-300, but these facts do not make the versions electrically interchangeable. Compare all LCD pins, the separate LED connection, cable exit, mounting and controller timing against the applicable drawings. The 2022 datasheet does not establish present-day stock or production status.
Frequently asked questions
Is BA104S01-200 a 300 cd/m² panel?
Not in the supplied BOE Rev. 0 / P0 specification. It gives 300 cd/m² as the minimum and 350 cd/m² as the typical center luminance. Do not label 300 cd/m² as the typical value for this document version.
What signal and backlight connectors does it use?
The LCD uses a 20-pin LVDS connection. Its LED backlight uses a separate 2-pin connection. Check connector orientation and each pin against the mechanical drawing.
Can I replace BA104S01-100 or -300 with BA104S01-200?
Not without engineering checks. The three modules have different LCD pin assignments and backlight arrangements, even though their nominal size and SVGA resolution match.
Source: Hefei BOE B3 BA104S01-200 Product Specification, Rev. 0 / P0, 2022-01-21; PDF pages shown in the table. Ask for the current revision for the actual module supplied.
