BOE panel selection and project support
Find a BOE LCD panel by its complete model number, then review the specification for your equipment. For a new design, define the display area, native resolution, controller output and installation constraints before shortlisting models.
For replacement work, start with a photo of the installed-panel label. Similar model codes or matching screen sizes do not establish that a panel will work with the existing controller, cable or enclosure.
Explore BOE product records
These links are starting points for separate model reviews, not interchangeable replacement recommendations. Confirm specifications for the exact suffix before approval.
Review the product record and compare the complete part number, drawing and controller requirements with your project.
Request this model
Check the panel and backlight requirements separately, including the cable, power supply and driver arrangement.
Request this model
Check the drawing, active area and native image format against the enclosure and the content your system will display.
Request this model
Match the panel to the complete display system
- Model and documentation: match the full suffix and revision to the panel label and applicable specification.
- Controller and signal: check the documented interface, channel or lane configuration, pin assignment, voltage and supported timing. Do not select a cable from connector pin count alone.
- Backlight and power: confirm whether an external driver is required and review its supply, enable and dimming requirements.
- Mechanical installation: compare active area, outline, depth, mounting points, connector position and cable clearance.
- Operating conditions: review luminance, viewing requirements and the specified temperature range for the installation. Evaluate cooling, enclosure and system-level requirements separately.
Can a BOE LCD panel connect directly to HDMI?
Check the exact panel specification. The panel signal interface is not the same as an input on a controller board. If a controller is needed, its output, firmware, cable and power arrangement must support that exact panel.
Can another BOE model replace an existing panel?
A shared brand, diagonal size or resolution is not sufficient. Compare electrical, mechanical and optical requirements, then validate a sample in the intended equipment.
Does the quotation include a controller or touch screen?
State whether you need the panel only or a display assembly. Controller boards, cables, backlight drivers and touch components should be itemized and checked for compatibility.
Request a BOE datasheet and quotation
Send the complete model code, quantity, project stage, delivery country and required delivery date. Include a panel-label photo and any available specification or drawing.
For a replacement review, add the controller model, cable details and installation constraints. For a new design, provide resolution, brightness, temperature and mechanical requirements so candidate panels can be screened.
Current availability, lead time and the supplied configuration will be checked for the requested model and quantity.
Request a BOE panel quote
