Mainstream Models and Application Scenarios of 7-inch LCD Screen in INNOLUX
Date:2025-06-06
Based on the market application and technical parameters of Innolux 7-inch LCD screens, the following are several models currently promoted by Innolux and their core features, classified and organized by application scenarios:
I. Basic industrial type (general scenario)
1 .AT070TN92
Brightness: 250 cd/m ² (typical value)
Resolution: 800 × 480 (WVGA)
Working temperature: -20 ° C~70 ° C
Interface: Single 60PIN RGB/Parallel
Features: Fast response time (10ms/15ms), suitable for dynamic image display, low cost.
Application: Industrial control equipment, instruments and meters, vehicle mounted rearview systems, building intercom terminals
2 .AT070TN83 V.1
Brightness: 400 cd/m ²
Resolution: 800 × 480
Interface: TTL (1 ch, 6-bit), 40 pins
Features: Easy to develop, with a built-in circuit board on the back.
Applications: Charging stations, textile machines, detection instruments
II. Wide temperature and high brightness type (harsh environment)
1.AT070TN94
Brightness: 450 cd/m ² (typical value)
Resolution: 800 × 480
Working temperature: -30 ° C~85 ° C
Seismic performance: 3.0G (clearly marked)
Features: Supports backlight customization (up to 1000nits or more), wide temperature and anti vibration.
Applications: Mining instruments, oil drilling equipment, desert/polar outdoor equipment.
2.G070Y2-L01
Brightness: 500 cd/m ²
Resolution: 800 × 480
Working temperature: -30 ° C~85 ° C
Interface: LVDS (20 pin)
Features: High contrast ratio (600:1), side entry LED backlight, lifespan of 50K hours.
Applications: Subway card swiping machines, ATM machines, medical equipment, outdoor industrial control screens
III. Full view industrial type (high-end display demand)
G070ACE-L01
Brightness: 500 cd/m ²
Resolution: 800 × 480
Viewing angle: 89 °/89 °/89 °/89 ° (full view)
Working temperature: -30 ° C~85 ° C
Interface: LVDS (30 pin, 6/8-bit)
Features: AAS display mode, higher color saturation (72% NTSC), supporting resistive/capacitive touch screen matching.
Applications: Precision instruments, handheld medical devices, highly interactive industrial control interfaces
IV. Industry specific type
AT070TN83 V.1
Brightness: 400 cd/m ²
Resolution: 800 × 480
Interface: TTL (1 ch, 6-bit), 40 pins
Features: Easy to develop, with a built-in circuit board on the back. Applications: Charging stations, textile machines, detection instruments
Main Recommended Model Comparison Quick Reference Table:
Model | Resolution | Brightness (cd/m ²) | Working temperature (° C) | interface type | Core advantages | Typical application scenarios |
AT070TN92 | 800*480
| 250 | -20 ~ 70° C | 60PIN RGB | Fast response and low cost | Car mounted rearview and building intercom |
AT070TN94 | 800*480 | 450 | -30 ~ 85° C | TTL | Wide temperature shock resistance, customizable backlight | Mining and oil drilling |
G070Y2-L01 | 800*480 | 500 | -30 ~ 85° C | 20PIN LVDS | High contrast, long-lasting backlight | Subway card reader, medical equipment |
G070ACE-L01 | 800*480 | 500 | -30 ~ 85° C | 30PIN LVDS | Full view angle, high color saturation | Precision instruments, handheld medical terminals |
AT070TN83 V.1 | 800*480 | 400 | -20 ~ 70° C | TTL 40 pins | Easy to develop, with built-in circuit board on the back | Charging station, textile machine, detection instrument |
| NJ070NA-23A | 1024×600 | 500 |
-20 ~ 70° C | 40 pins LVDS | High resolution, LVDS interface | Check the instrument |
Suggested selection for conventional industrial scenarios (indoor) → AT070TN92 (high cost-effectiveness) or AT070TN94 (strong compatibility).
Outdoor/Extreme Environment → AT070TN94 (Wide Temperature Seismic Resistance) or G070Y2-L01 (High Brightness+LVDS Anti Interference). High interaction precision equipment → G070ACE-L01 (full view+color accuracy)
Matters needing attention:
Product status: Some old models (such as AT070TN06/V1) have been discontinued, it is recommended to choose mass-produced models (such as G070 series).
Interface compatibility: LVDS interfaces (such as G070ACE-L01) are more suitable for long-distance signal transmission and reduce interference in industrial environments. Certification requirement: MIL-STD or medical certification must be confirmed for military or medical scenarios (such as G070Y2-L01 having passed industrial level testing).
If you need specific model specifications or supply chain support, please send an email for further consultation market@hzxuhong.com .
