Your location:Home > Solution >

What Is an LVDS Interface? LCD Signals and Display Basics

Date:2019-04-26

LVDS stands for Low-Voltage Differential Signaling. It is a way of transmitting electrical signals, not a type of LCD glass or a universal connector. In LCD specifications, an LVDS interface usually refers to a serialized video connection between a host or display controller and the panel's receiving electronics.

An "LVDS display" or "LVDS screen" is therefore a display that accepts the specified LVDS video input. The label alone does not tell you its resolution, color performance, pin assignment or power requirements. Those details come from the exact panel specification.

How does an LVDS LCD interface work?

LVDS sends signals over pairs of conductors. The receiver detects the voltage difference between the two conductors rather than treating each as an independent data wire. Analog Devices explains this differential signaling principle and its advantages for noise immunity and reduced electromagnetic emissions. Cable construction, routing and the complete circuit still matter; LVDS does not mean interference is impossible.

In a conventional serialized LCD connection, a transmitter packs RGB image data and display-control information into several differential data streams. A clock travels with the data so the receiving electronics can recover it. As one concrete example, TI's DS90C385A transmitter uses four data pairs and a separate clock pair for its 24-bit RGB display connection. That example is not a pinout for every LVDS panel.

LVDS is also used outside displays. The general LVDS definition describes a signaling standard, while an LCD interface additionally needs an agreed data format and timing. An arbitrary LVDS output on a processor or sensor is not automatically an LCD-compatible video output.

Single-channel, dual-channel, 6-bit and 8-bit LVDS

Link count and color depth describe different things. Here, "single-channel" and "dual-channel" mean one or two display links, not the number of individual wire pairs. In dual-link LCD arrangements, the two links share the pixel stream. Follow the panel's documented assignment.

Four common LCD interface descriptions
DescriptionWhat it means
Single-channel, 6-bitOne display link. Each pixel carries 6 red, 6 green and 6 blue bits: 18 RGB bits per pixel.
Dual-channel, 6-bitTwo display links share the pixel stream. Each pixel still carries 18 RGB bits; adding the second link does not make it 36-bit color per pixel.
Single-channel, 8-bitOne display link. Each pixel carries 8 red, 8 green and 8 blue bits: 24 RGB bits per pixel.
Dual-channel, 8-bitTwo display links share the pixel stream. Each pixel still carries 24 RGB bits; adding the second link does not make it 48-bit color per pixel.

These are common configurations, not an exhaustive classification of every LVDS device. RGB bit counts exclude timing/control information and do not specify the complete connector pin count.

The distinction is visible in TI's DS90C387A dual-pixel transmitter description: 48 RGB input bits represent two pixels with 24-bit color each. Similarly, 36 RGB bits across two 18-bit pixels do not mean that one pixel has twice the color depth. Check both bits per color and link configuration when reading an abbreviated panel listing.

What are VESA and JEIDA data mappings?

For an LVDS LCD connection, data mapping defines how color bits are arranged in the transmitted streams. VESA and JEIDA are mapping names you may encounter. A source and panel must agree on the applicable format; matching resolution and the label "24-bit LVDS" alone is not enough.

For example, NXP's PTN3460 family lists single/dual LVDS operation, 18/24-bit color depth and VESA/JEIDA packing as separate configuration features. This illustrates what must be specified; it does not mean every controller or panel can switch between all those modes. If a listing is unclear, request the panel's data-mapping diagram rather than guessing from a format nickname.

Does the same LVDS connector mean compatibility?

No. A matching connector shape or pin count is not a compatibility check. The connector's pin assignment, panel supply, link configuration, bit depth, data mapping and supported timing must agree with the host and cable. A motherboard-side header can also have a different pin arrangement from the panel-side connector.

The "low voltage" in LVDS describes the signaling method, not a universal supply voltage for the LCD module. Panel power and backlight power/control must be checked separately in the product documents. Do not apply a signal-voltage figure as a power-supply setting, copy an unidentified wiring diagram or connect an unverified cable to test whether it works.

For an actual replacement, use the industrial LVDS panel selection guide. It covers the wider review of the exact model, controller, cable, mechanical fit and system requirements. This article explains terminology; it does not certify a drop-in replacement.

Frequently asked questions about LVDS displays

Is LVDS the same as HDMI or eDP?

No. These interfaces are not interchangeable simply because they carry video. A connection between different interfaces may need a suitable controller or bridge and a model-specific design review, not just a cable with matching ends. See the eDP interface introduction for its meaning, or the eDP and LVDS conversion checklist for conversion-specific checks.

Does an LVDS screen automatically support touch?

No. An LVDS video input does not establish whether the supplied assembly includes a touch sensor, touch controller or a supported touch connection to the host. Confirm touch capability separately from the image-display interface.

Is LVDS only used on large LCD screens?

Do not identify an interface from screen size. The same size category can contain panels with different interfaces, and an LVDS label does not guarantee wide viewing angles, a particular resolution or superior colors. Read the exact model's interface and optical specifications instead of using a size threshold.

Need help selecting an LVDS LCD panel?

Send the complete panel model and suffix or a label photo, host/controller model, and the interface information available in the specification. Include your required size, resolution, application, quantity and delivery country. State whether you need the panel only or help reviewing the controller and cable requirements.

Request an LVDS panel review

  • Contact Us
  • Email: market@hzxuhong.com
  • Skype: hzxuhong
  • Whatsapp: +86-18157128672 
  • Tel:+86-18157128672
  • Address:A402, No. 8 Xiyuan 9th Road, Xihu District, Hangzhou, Zhejiang, China